Low Vibration Needle Scalers Increase Worker Productivity & Reduce Workers Compensation Claims

Are you looking for ways to increase operator productivity while reducing the risk of worker’s comp claims? Vibration dampened needle scalers and chippers are a great way to keep operators on the job longer and reduce the risk of repetitive stress injuries like Hand Arm Vibration Syndrome (HAVS) also known as “White Finger.”
When performing coating removal, de-rusting or descaling using standard percussive tools, numbness can begin to set in after just a few hours. Workers may or may not notice the sensation at the end of their shift and the effects are cumulative. A vibration dampened needle scaler reduces the measurable vibration to about 1/10th the amount of a typical needle scaler (2.73 m/s2 vs. 24.9 m/s2). This allows an operator to work more hours per day, while mitigating the chances of incurring Hand Arm Vibration Syndrome (HAVS).
Dampened needle scales and chippers come in pistol or inline varieties and should be selected by application. You can learn more about each type of tool here:

Pistol needle scaler

Inline needle scaler

Pistol chipper

Inline chipper

Regardless of which orientation you select, vibration dampened tools help increase operator productivity by creating a safer work environment. Additionally, they reduce noise output by more than 10 decibels, which can further improve working conditions and boost employee morale.

If you have any questions about vibration dampened air tools, we are here to help. Feel free to email or give us a call at (619) 795-7955. We are happy to give you the advice you need to choose the best tool for the job.
Here’s to increased productivity!

How To Maximize Air Tool Performance Part #1 | Pressure and Flow

San Diego, CA – April 21st, 2013

Throughout the course of our daily operations, we often receive calls from customers asking which is the best “brand” of air tool. This is almost always a loaded question and rather than engage them in the Ford versus Chevy debate, a little further questioning usually reveals dissatisfaction with the performance of one of their tools. While in almost all cases an industrial production grade air tool is going to provide better performance than an automotive / maintenance style tool, there are some sure fire ways to ensure optimal performance regardless of the quality of the tool selected. In this article we will focus on the two most important factors in air tool performance, these being pressure and flow.

Proper Air Pressure (PSI) – The vast majority of air tools on the market are designed to run on 90 pounds per square inch of pressure, commonly known as PSI. The misconception is that a 2-1/2″ drive impact wrench requires more air pressure than a small right angle die grinder. The reality is that both of these tools are designed to run optimally on the industry standard 90 PSI. Exceeding the manufacturers recommended air pressure can actually damage components, shortening tool life and creating a potentially dangerous situation by compromising the burr, wheel, or other accessory in use. Furthermore, you want to be sure that you are getting 90 PSI of pressure when the air tool (or tools if working with multiple stations) is running. Use an air regulator to gauge the pressure while the tool is wide open. If the needle reads 90 PSI when the throttle of the tool is closed but dips below that when the tool is engaged you need more pressure. Again, most air tools are designed to run at 90 PSI and will underperform if under pressurized.

Air Flow (CFM) – What varies widely from tool to tool is the required air flow rate which is measured in cubic feet per minute (CFM). Before selecting an air tool for any application be sure that your air compressor can generate the necessary CFM. As a very generalized rule of thumb you can conclude that for every one horse power that your compressor puts out, you will receive 3 to 4 CFM. To put it in perspective a small right angle die grinder uses about 25 CFM while a 1″ impact wrench requires 60 CFM. In addition to verifying that your compressor has the guts to power the tool on hand, make sure you aren’t starving the tool by restricting air flow through the use of a small diameter air hose. Never use reducers to adapt a 3/8″ NPT or 1/2″ NPT to a 1/4″ air line. In fact, if you can avoid it try not using 1/4″ air lines at all. Free unrestricted air flow is paramount to maximizing air tool performance and it’s better to error on the side of too large a hose rather than choke the tool. Nothing will sabotage your project faster than an underpowered tool and lack of flow is definitely a deal breaker.

In the next installment of this five part series we will look at why every air tool deserves to be paired with a good filter, regulator, lubricator.

Thanks for reading…

Mark Schieber

About the author:

Mark Schieber is an air tool entrepreneur, international business fanatic, internet marketer, and avid surfer. He is the owner of International Air Tool & Industrial Supply Company and is passionate about helping his customers maximize productivity related to air tools and their applications. For questions about this topic or anything else air tool related that might be on your mind email

Fein Power Tools Affirms International Air Tool Co. as Authorized Distributor

San Diego, CA –  July 15th, 2012

International Air Tool & Industrial Supply Company, a San Diego, CA based distributor of pneumatic and electric tools, pumps, and hoists; is pleased to announce the formation of a new partnership with Fein Power Tools of Germany. Under the agreement, International Air Tool will represent Fein products, including Fein angle grinders and Fein magnetic drills in the Southern California and Northern Mexico Markets. According to Mark Schieber, International Air Tool’s President, “The addition of Fein Power Tools to our portfolio of products represents a well though out and strategic move to complement our industrial air tool offering with electric tools of comparable quality. At International Air Tool & Industrial Supply Co. we proudly offer our customers only the finest grade power tools designed with long term value in mind. The Fein product offering is consistent with this view as they sacrifice nothing in producing electric power tools of superior quality and reliability.”

The two firms have agreed to strategically approach metalworking markets that will most greatly benefit from the innovative Fein offering. These include customers in the ship building, turbine engine fabrication, and aersopace industries. As part of the go to market strategy, Fein and International Air Tool will offer customers in Southern California the opportunity to receive free on site products demonstration performed from Feins mobile show room vans. These demonstrations will allow customers the opportunity to test the tools before they commit to a purchase.

About Fein Power Tools:

Emil Fein invented the first electric hand drill in Germany in 1895. With this invention, he laid the foundation for the highly reliable power tools that FEIN continues to manufacture in Germany and for which this tradition-rich company is respected in trade and industry throughout the world. FEIN has been among the world’s leading power tool manufacturers for over 140 years. And that is also undoubtedly because, with every new product innovation, FEIN continues to pay attention to its commitment to only develop durable power tools of the highest quality.

About International Air Tool & Industrial Supply Company:

International Air Tool & Industrial Supply Company is a San Diego, CA based distributor & exporter of pneumatic & electric tools, diaphragm pumps, hoists and related accessories. We carry only the finest quality, brand name tools and pride ourselves on our technical expertise and excellent customer service. We are a family run operation that effectively serves customers regionally, nationally, and abroad.